stakpure DC 400. Digital conductivity meter.
Developed for online measurement of pure and ultrapure water downstream of ionexchange cartridges and for monitoring ring-main systems. High-precision conductivity meter ensuring exact measurement of temperature and conductivity for constantly monitoring quality. Digital display guarantees to show readings even at the lowest end of the conductivity measurement range.
Comes complete with connecting cable, plug-type power supply unit, set of two 1.5 m hoses and measuring cell.
Large graphic display
2-colour, back-lit graphic digital display indicating conductivity in μS/cm or in MΩcm and temperature in °C. Background illumination changes from green to red to signal a fault and show plaintext message.
LED indicators
Show red/green to signalise when limit values are exceeded for temperature and conductivity.
Limiting values
Infinite adjustment of limiting values for temperature and conductivity.
Interface
Direct connection of peripheral equipment at potential-free contact.
High-precision measurement
Automatic calibration before each measurement with integrated reference resistor, temperature measured by platinum temperature sensor.
Voltage selection
Automatic voltage selection for international use.
Overview
| Conductivity measurement range | 0.1 – 300 μS/cm (automatically switches over at 9.99) |
||
| Temperature measurement range | 0.1 – 50 °C | ||
| Temperature compensation | automatic | ||
| Conductivity limiting value setting | 0.1 – 30 μS/cm, infinitely variable | ||
| Temperature limiting value setting | 1 – 50 °C infinitely variable | ||
| Signals on exceeding limiting value | red/green LED indicator + buzzer (both can be deactivated) |
||
| Fault signalling | Display changes from green to red | ||
| Interface (optional only) | potential-free contact | ||
| Power supply | 110/230 V/50 – 60 Hz (automatic voltage selection) |
||
| Dimensions mm (W x D x H) | 73 x 32 x 141 | ||
| Installation | Wall mounting | ||
| Connection* | R ¾“ | ||
| Version | with potential-free contact | with potential-free contact + solenoid valve |
|
| Order no. | 14180500 | 14180600 | 14180700 |
stakpure AC 100. Analogue conductivity meter.
Conductivity meter as the easy and reliable answer to measuring the conductivity of pure water. Analogue display of measurement value in μS/cm. Either for connecting directly to ion-exchange cartridges or for space-saving wall installation.
Comes complete with measuring cell and set of two 1.5 m hoses.
Overview
| Measurement range | 0.1 – 50 μS/cm | 0.1 – 50 μS/cm |
| Power supply | 230 V/50 – 60 Hz | 230 V/50 – 60 Hz |
| Dimensions mm (W x D x H) | 93 x 123 x 170 | 93 x 125 x 96 |
| Connection* | R ¾“ | R ¾“ |
| Order no. (for connecting directly to DS 1500 – 15000) | 14160100 | |
| Order no. (for wall installation only) | 14160200 | |
Media
VirtualLAB
Explore stakpure in 3D
Flyer and
inquiry Form
Brochure
Ion-exchanger
