Close

OmniaLabUP

The constant one.
For H2O pure type II.

OmniaLabUP is the system of choice when you need a constant supply of high-quality water in laboratories. For this, OmniaLabUP holds 100 litres of type II pure water in reserve in a storage tank with quality recirculation. It is an optimal supplier to autoclaves, lab rinsing machines and ultrapure water systems. The water produced conforms to international medical technology water standards such as ASTM, ISO 3696 and CLRW (CLSI).

Features

  • OptiFill Dispenser is standard
  • 100 l tank with quality recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on
a work surface
Tank fits space-savingly under the<br />
bench-top
Tank fits space-savingly under the bench-top

Specifications

OmniaLabUP20

OmniaLabUP40
Type II
Pure water performance l/h at 15 °C2040
Conductivity µS/cm0.067 – 0,10.067 – 0,1
Resistance MΩ x cm15 – 1015 – 10
Dispensing performance dispenser l/min.
up to 2up to 2
Pure water tank pressurized outlet
optionaloptional
Particles*/ml< 1< 1
Bacteria* CFU/ml< 0.1< 0.1

Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05
Free chlorine content mg/l< 0.1< 0.1
Silt density index (SDI)max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-60
Connected load kW0.10.1
Connector size3/4"3/4"
Ambient temperature+ 2 up to 35 °C+ 2 up to 35 °C
Dimensions
Tower* W x H x D mm
511 x 1520 x 575511 x 1520 x 575
Dimensions
Base cabinet tank mm
511 x 800 x 575511 x 800 x 575
Weight kg4040
* with sterilizing filter 0.2 µm
** with OptiFill Dispenser

Article no.

System type*

Typical applications
18600020OmniaLabUP20Feedwater for autoclaves and laboratory washers
18600040OmniaLabUP40Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included
Accessories
19200020Pre-treatment unit OmniaLab – 10“
19200050UV tank disinfection unit 254 nm
19200051UV Flow through disinfection 254 nm
16561201External pressure booster pump SC 3000

Fließschema OmniaLabUP


Specifications

OmniaLabUP20

OmniaLabUP40
Type II
Pure water performance l/h at 15 °C2040
Conductivity µS/cm0.067 – 0,10.067 – 0,1
Resistance MΩ x cm15 – 1015 – 10
Dispensing performance dispenser l/min.
up to 2up to 2
Pure water tank pressurized outlet
optionaloptional
Particles*/ml< 1< 1
Bacteria* CFU/ml< 0.1< 0.1

Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05
Free chlorine content mg/l< 0.1< 0.1
Silt density index (SDI)max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-60
Connected load kW0.10.1
Connector size3/4"3/4"
Ambient temperature+ 2 up to 35 °C+ 2 up to 35 °C
Dimensions
Tower* W x H x D mm
511 x 1520 x 575511 x 1520 x 575
Dimensions
Base cabinet tank mm
511 x 800 x 575511 x 800 x 575
Weight kg4040
* with sterilizing filter 0.2 µm
** with OptiFill Dispenser

Article no.

System type*

Typical applications
18600020OmniaLabUP20Feedwater for autoclaves and laboratory washers
18600040OmniaLabUP40Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included
Accessories
19200020Pre-treatment unit OmniaLab – 10“
19200050UV tank disinfection unit 254 nm
19200051UV Flow through disinfection 254 nm
16561201External pressure booster pump SC 3000

Fließschema OmniaLabUP