Close

Type II

Pure water

Your laboratory tasks determine which Omnia system is required. Pure water is needed not only for laboratory autoclaves and washing machines, but also for feeding to ultra pure water systems. You have the choice between only Type II water or additionally with Type I ultra pure water:

OmniaTap is the allrounder with integrated reverse osmosis incl. recirculation tank for Type II pure water and economical ultra pure water Type I.

Details

OmniaTap

The Allrounder.
For H2O pure types I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality. The pure water tank has a second outlet for feeding downstream end users.

Features

  • OptiFill dispenser is standard
  • Pretreatment set for direct connection to tap water
  • 10-litres pure water tank
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on a
work surface
SpecificationsOmniaTapOmniaTap UVOmniaTap UV/UF
Type I
Conductivit µS/cm0.0550.0550.055
Resistance MΩ x cm18.218.218.2
TOC-value* ppb5 – 101 – 51 – 5
Dispensing performance l/min.
up to 2up to 2up to 1.6
Endotoxins* EU/ml--< 0,001
Particles**/ml< 1< 1< 1
Bacteria** CFU/ml< 0.1< 0.1< 0.1

Type II
Pure water performance l/h at 15 °C6 or 126 or 126 or 12
Conductivity µS/cm0.067 – 0.10.067 – 0.10.067 – 0.1
Resistance MΩ x cm15 – 1015 – 1015 – 10
Pure water tank pressurized outletoptionaloptionaloptional

Feedwater requirements
Tap water according to DIN 2000
Feedwater temperature °C+ 2 up to 35
+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05< 0.05
Free chlorine content mg/l
< 0.1< 0.1< 0.1
Silt density index (SDI)max. 3max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-6090-240/50-60
Connected load kW0.10.10.1
Connector size mm3/4"3/4"3/4"
Ambient temperature °C
+ 2 up to 35+ 2 up to 35+ 2 up to 35
Dimensions*** W x H x D mm390 x 720 x 615390 x 720 x 615390 x 720 x 615
Weight kg202121
* in dependence on the feedwater quality
** with sterilizing filter 0.2 µm
*** with OptiFill Dispenser
Article no.System type*Typical applications
18200051OmniaTap 6AAS, IC, ICP, buffers and media preparation
18200101OmniaTap 12AAS, IC, ICP, buffers and media preparation
18200052OmniaTap 6 UVUltra-trace analysis, ICP-MS, HPLC, TOC
18200102OmniaTap 12 UVUltra-trace analysis, ICP-MS, HPLC, TOC
18200053OmniaTap 6 UV/UFLife science and microbiology, cell culture media
18200103OmniaTap 12 UV/UFLife science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included
Accessories
19200300Wall mount Omnia
19200056Disinfection kit Omnia
19200057Disinfectant Omnia – 3 pcs./pack
19200021Pre-treatment unit OmniaTap –10“

Fließschema OmniaTap


OmniaLabED+ is the larger allrounder for the complete laboratory. The perfect 100l tank system for both Type II applications and ultra pure water Type I.

Details

OmniaLabED+

The big one.
For H2O pure types I + II.

OmniaLabED+ is the system of choice when both pure water and ultrapure water are needed for the entire laboratory. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer, without having to give any demanding analytical applications a pass. Further to this, each OmniaLabED+-system holds 100 litres of pure water type II ready for withdrawal in a storage tank that is equipped with quality recirculation. OmniaLabED+ is exactly right as pure water supplier to autoclaves and laboratory washing machines.

Features

  • OptiFill dispenser is standard
  • Continuous residual salts removal by electro-deionization
  • 100 litre storage tank with recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on
a work surface
Tank fits space-savingly under the<br />
bench-top
Tank fits space-savingly under the bench-top
SpecificationsOmniaLabED+20OmniaLabED+40OmniaLabED+70
Type I
Conductivity μS/cm0.0550.0550.055
Resistance M Ω x cm18.218.218.2
TOC-value* ppb (with UV-unit)1 – 51 – 51 – 5
Dispensing performance dispenser l/min.up to 2up to 2up to 2
Particles**/ml< 1< 1< 1
Bacteria** CFU/ml< 0.1< 0.1< 0.1

Typ II
Pure water performance l/h
at 15 °C
204070
Conductivity µS/cm0.067 – 10.067 – 10.067 – 1
Resistance* MΩ x cm15 – 115 – 115 – 1
Silicate removal** %99.999.999.9
Pure water tank
pressurized outlet
optionaloptionaloptional


Feedwater requirements
Drinking water according to DIN 2000
Feedwater temperature °C
+ 2 up to 35+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05< 0.05
Free chlorine content mg/l
< 0.1< 0.1< 0.1
Silt density index (SDI)max. 3max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-6090-240/50-60
Connected load kW0.250.250.25
Connector size mm3/4"3/4"3/4"
Ambient temperature °C+ 2 up to + 35+2 up to + 35+ 2 up to + 35
Dimensions

Tower*** W x H x D mm
511 x 1520 x 575511 x 1520 x 575511 x 1520 x 575
Dimensions

Base cabinet tank mm
511 x 800 x 575511 x 800 x 575511 x 800 x 575
Weight kg434345
* in dependence on the feedwater quality
** with sterilizing filter 0.2 µm
*** with OptiFill Dispenser

Article no.

System type*

Typical applications
18700020OmniaLabED+20Feedwater for autoclaves and laboratory washers
18700040OmniaLabED+40Feedwater for autoclaves and laboratory washers
18700070OmniaLabED+70Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
16125000Water softener MixMulti 32
19200021Pre-treatment unit OmniaLab - 10“
19200050UV Flow through disinfection – 254 nm
19200052UV Unit for TOC reduction – 254 nm
16561201External pressure booster pump SC 3000

Fließschema OmniaLabED+


OmniaLabED is the efficient solution when high quality pure water Type II is required for the complete lab supply.

Details

OmniaLabED

The efficient one.
For H2O pure type II.

OmniaLabED is the efficient solution when high quality pure water Type II is required for the complete lab supply. It is compliant with international water standards, such as ASTM, ISO 3696, CLRW (CLSI), and the combination with continual self-regenerating electro-deionization brings maximized economy. Further to this, the OmniaLabED system holds 100 liters of pure water in a storage tank with quality recirculation, ready to supply lab equipment. OmniaLabED is the efficient one for supplying autoclaves, lab machines and ultra-pure water systems.

Features

  • OptiFill dispenser is standard
  • Continuous residual salts removal by electro-deionization
  • 100 litre storage tank with recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on
a work surface
Tank fits space-savingly under the<br />
bench-top
Tank fits space-savingly under the bench-top

Specifications

OmniaLabED20

OmniaLabED40

OmniaLabED70
Type II
Pure water performance l/h at 15 °C204070
Conductivity µS/cm0.1 – 10.1 – 10.1 – 1
Resistance* MΩ x cm10 – 110 – 110 – 1
TOC-value* ppb< 30< 30< 30
Silicate removal* %99.999.999.9
Dispensing performance dispenser l/min.up to 2up to 2up to 2
Particles**/ml< 1< 1< 1
Bacteria** CFU/ml< 0.1< 0.1< 0.1
Pure water tank
pressurized outlet
optionaloptionaloptional

Feedwater requirements
Softened water according to DIN 2000
Feedwater temperature °C
+ 2 up to 35+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05< 0.05
Free chlorine content mg/l< 0.1< 0.1< 0.1
Silt density index (SDI)max. 3max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-6090-240/50-60
Connected load kW0.250.250.25
Connector size mm3/4"3/4"3/4"
Ambient temperature °C+ 2 up to 35+ 2 up to 35+ 2 up to 35
Dimensions

Tower*** W x H x D mm
511 x 1520 x 575511 x 1520 x 575511 x 1520 x 575
Dimensions

Base cabinet tank mm
511 x 800 x 575511 x 800 x 575511 x 800 x 575
Weight kg414143
*  in dependence on the feedwater quality
** with sterilizing filter 0.2 µm
*** with OptiFill Dispenser

Article no.

System type*

Typical applications
18700021OmniaLabED20Feedwater for autoclaves, laboratory washers and ultrapure water systems
18700041OmniaLabED40Feedwater for autoclaves, laboratory washers and ultrapure water systems
18700071OmniaLabED70Feedwater for autoclaves, laboratory washers and ultrapure water systems
* RO cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included
Accessories
16125000Water softener MixMulti 32
19200020Pre-treatment unit OmniaLab - 10“
19200050UV Tank disinfecting unit 254 nm
19200051UV Flow through disinfection – 254 nm
16561201External pressure booster pump SC 3000

Fließschema OmniaLabED


OmniaLabUP is the system of choice when you need a constant supply of high-quality water in laboratories.

Details

OmniaLabUP

The constant one.
For H2O pure type II.

OmniaLabUP is the system of choice when you need a constant supply of high-quality water in laboratories. For this, OmniaLabUP holds 100 litres of type II pure water in reserve in a storage tank with quality recirculation. It is an optimal supplier to autoclaves, lab rinsing machines and ultrapure water systems. The water produced conforms to international medical technology water standards such as ASTM, ISO 3696 and CLRW (CLSI).

Features

  • OptiFill Dispenser is standard
  • 100 l tank with quality recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on
a work surface
Tank fits space-savingly under the<br />
bench-top
Tank fits space-savingly under the bench-top

Specifications

OmniaLabUP20

OmniaLabUP40
Type II
Pure water performance l/h at 15 °C2040
Conductivity µS/cm0.067 – 0,10.067 – 0,1
Resistance MΩ x cm15 – 1015 – 10
Dispensing performance dispenser l/min.
up to 2up to 2
Pure water tank pressurized outlet
optionaloptional
Particles*/ml< 1< 1
Bacteria* CFU/ml< 0.1< 0.1

Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l
< 0.05< 0.05
Free chlorine content mg/l< 0.1< 0.1
Silt density index (SDI)max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-60
Connected load kW0.10.1
Connector size3/4"3/4"
Ambient temperature+ 2 up to 35 °C+ 2 up to 35 °C
Dimensions
Tower* W x H x D mm
511 x 1520 x 575511 x 1520 x 575
Dimensions
Base cabinet tank mm
511 x 800 x 575511 x 800 x 575
Weight kg4040
* with sterilizing filter 0.2 µm
** with OptiFill Dispenser

Article no.

System type*

Typical applications
18600020OmniaLabUP20Feedwater for autoclaves and laboratory washers
18600040OmniaLabUP40Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included
Accessories
19200020Pre-treatment unit OmniaLab – 10“
19200050UV tank disinfection unit 254 nm
19200051UV Flow through disinfection 254 nm
16561201External pressure booster pump SC 3000

Fließschema OmniaLabUP


OmniaLabDS is the perfect solution when safety is first priority and the quality of the purification decides the quality of results.

Details

OmniaLabDS

The reliable one.
For H2O pure types II + CLRW (CLSI) + DIN EN 285 + EN ISO 15883.

When safety is first priority and the quality of the purification decides the quality of results, then the OmniaLabDS system is the perfect solution. Even for large pure water quantities of up to 80 l/h, OmniaLabDS guarantees international water standards compliance. The combination of regenerative polishing cartridge and an optional emergency supply makes this system extremely reliable for supplying clinical analytical systems, as well as for feeding water to steam sterilizers and washer-disinfectors.

Features

  • OptiFill dispenser is standard
  • 100 l tank with quality recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard
  • Emergency supply (optional)
  • Degassing unit (optional)


One hand operation
One hand
operation
Easy water dispensing
Easy water
dispensing
Flexible on a work surface
Flexible on
a work surface
Tank fits space-savingly under the<br />
bench-top
Tank fits space-savingly under the bench-top

Specifications

OmniaLabDS20

OmniaLabDS40

OmniaLabDS60

OmniaLabDS80
Type II + CLRW (CLSI) DIN EN 285 + ISO EN 15883
Pure water performance l/h
at 15 °C
20406080
Conductivity μS/cm0.1 – 1.00.1 – 1.00.1 – 1.00.1 – 1.0
Resistance M Ω x cm10 – 110 – 110 – 110 – 1
Dispensing performance dispenser l/min.up to 2up to 2up to 2up to 2
Pure water tank pressurized outletoptionaloptionaloptionaloptional
Particles*/ml< 1< 1< 1< 1
Bacteria* CFU/ml< 0.1< 0.1< 0.1< 0.1

Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C+ 2 up to 35+ 2 up to 35+ 2 up to 35+ 2 up to 35
Manganese and iron content mg/l< 0.05< 0.05< 0.05< 0.05
Free chlorine content mg/l< 0.1< 0.1< 0.1< 0.1
Silt density index (SDI)max. 3max. 3max. 3max. 3

Technical data
Operating pressure bar2 – 62 – 62 – 62 – 6
Supply voltage Volt/Hz90-240/50-6090-240/50-6090-240/50-6090-240/50-60
Connected load kW0.10.10.10.1
Connector sizeR 3/4"R 3/4"R 3/4"R 3/4"
Ambient temperature °C+ 2 up to 35
+ 2 up to 35
+ 2 up to 35
+ 2 up to 35
Dimensions

Tower** W x H x D mm
511 x 1520 x 575511 x 1520 x 575511 x 1520 x 575511 x 1520 x 575
Dimensions

Base cabinet tank mm
511 x 800 x 575511 x 800 x 575511 x 800 x 575511 x 800 x 575
Weight kg (without polishing cartridge)
39394040
* with sterilizing filter 0.2 μm
** with OptiFill Dispenser

Article no.

System type*

Typical applications
18800020OmniaLabDS20Feedwater for analyzers, autoclaves and laboratory washers
18800040OmniaLabDS40Feedwater for analyzers, autoclaves and laboratory washers
18800060OmniaLabDS60Feedwater for analyzers, autoclaves and laboratory washers
18800080OmniaLabDS80Feedwater for analyzers, autoclaves and laboratory washers

* RO cartridge, stainless steel polishing cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
19200020Pre-treatment unit OmniaLab – 10“
19200050UV tank disinfection unit 254 nm
19200051UV Flow through disinfection 254 nm
12280050Replacement/second polishing cartridge type DS 2800 RV
19200040Emergency supply
19200041Degassing unit
16561201External pressure booster pump SC 3000

Fließschema OmniaLabDS

Media

Omnia
3D-Video

OMNIA Produktvideo

Brochure pure and ultrapure water systems

Omnia Broschüre

H2O pure – Water in its purest form.