Type I

OmniaTap is the allrounder with integrated reverse osmosis incl. recirculation tank for Type II pure water and economical ultra pure water Type I.

OmniaTap

The Allrounder.
For H₂O pure types I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality. The pure water tank has a second outlet for feeding downstream end users.

Features

• OptiFill dispenser is standard
• Pretreatment set for direct connection to tap water
• 10-litres pure water tank
• Tank volume display in percent
• Simple and economical filter replacement
• Leakage sensor is standard
• Ready-to-use, including filter cartridges

• Technical Data
• Flow chart

Specifications	OmniaTap	OmniaTap UV	OmniaTap UV/UF
Type I
Conductivit µS/cm	0.055	0.055	0.055
Resistance MΩ x cm	18.2	18.2	18.2
TOC-value* ppb	5 – 10	1 – 5	1 – 5
Dispensing performance l/min.	up to 2	up to 2	up to 1.6
Endotoxins* EU/ml	-	-	< 0,001
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Type II
Pure water performance l/h at 15 °C	6 or 12	6 or 12	6 or 12
Conductivity µS/cm	0.067 – 0.1	0.067 – 0.1	0.067 – 0.1
Resistance MΩ x cm	15 – 10	15 – 10	15 – 10
Pure water tank pressurized outlet	optional	optional	optional
Feedwater requirements
Tap water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.1	0.1	0.1
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Dimensions*** W x H x D mm	390 x 720 x 615	390 x 720 x 615	390 x 720 x 615
Weight kg	20	21	21
* in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type*	Typical applications
18200051	OmniaTap 6	AAS, IC, ICP, buffers and media preparation
18200101	OmniaTap 12	AAS, IC, ICP, buffers and media preparation
18200052	OmniaTap 6 UV	Ultra-trace analysis, ICP-MS, HPLC, TOC
18200102	OmniaTap 12 UV	Ultra-trace analysis, ICP-MS, HPLC, TOC
18200053	OmniaTap 6 UV/UF	Life science and microbiology, cell culture media
18200103	OmniaTap 12 UV/UF	Life science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included

Accessories
19200300	Wall mount Omnia
19200056	Disinfection kit Omnia
19200057	Disinfectant Omnia – 3 pcs./pack
19200021	Pre-treatment unit OmniaTap –10“

OmniaPure is the autonomous specialist with integrated pretreatment and ultra pure water cartridge.

OmniaPure

The specialist.
For H₂O pure type I.

When your need is for highest quality pure water that fulfils the demands of analytical and life science laboratory requirements, then one of these OmniaPure systems type will be right for you. You can configurate it. The incorporated pre-treatment constantly ensures the reliability of your experimental results and reduces running costs.

Features

• OptiFill dispenser is standard
• Real time TOC monitoring
• Spent filters are simply and quickly changed
• Leakage sensor is standard
• Integrated pressure reducer is standard
• Precise volume control
• Ready-to-use, including filter cartridges

• Technical Data
• Flow chart

Specifications	OmniaPure	OmniaPure UV | UV-TOC	OmniaPure UV/UF | UV-TOC/UF
Typ I
Conductivity µS/cm	0.055	0.055	0.055
Resistance MΩ x cm	18.2	18.2	18.2
TOC-value* ppb	5 – 10	1 – 5	1 – 5
TOC monitor	–	– / yes	– / yes
Dispensing performance l/min.	up to 2	up to 2	up to 1.6
Endotoxins* EU/ml	–	–	< 0.001
RNase* ng/ml	–	–	< 0,01
DNase* pg/µl	–	–	< 4
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Feedwater requirements
Water prepared by ion exchange, reverse osmosis, electrodionisation or distillation
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+2 up to 35
Input conductivity µS/cm	< 30	< 30	< 30
TOC-value ppb	< 50	< 50	< 50
Technical data
Operating pressure bar	0.5 – 6	0.5 – 6	0.5 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.1	0.1	0.1
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to 35	+2 up to 35	+ 2 up to 35
Dimensions *** W x H x D mm	390 x 720 x 525	390 x 720 x 525	390 x 720 x 525
Dimensions production unit W x H x D mm	390 x 480 x 380	390 x 480 x 380	390 x 480 x 380
Dimensions OptiFill Wall dispenser	100 x 520 x 460	100 x 520 x 460	100 x 520 x 460
Dimensions OptiFill Bench dispenser	140 x 580 x 520	140 x 580 x 520	140 x 580 x 520
Weight kg	19	20	20
* in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type* Standard	Article no.	System type* Production unit + Wall dispenser**	Article no.	System type* Production unit + Bench dispenser**	Typical applications
18200001	OmniaPure	18200011	OmniaPure-W	18200021	OmniaPure-T	AAS, IC, ICP, buffers and media preparation
18200002	OmniaPure UV	18200012	OmniaPure-W UV	18200022	OmniaPure-T UV	Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
18200003	OmniaPure UV/UF	18200013	OmniaPure-W UV/UF	18200023	OmniaPure-T UV/UF	Life science and microbiology, cell culture media
18200004	OmniaPure UV-TOC	18200014	OmniaPure-W UV-TOC	18200024	OmniaPure-T UV-TOC	Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
18200005	OmniaPure UV-TOC/UF	18200015	OmniaPure-W UV-TOC/UF	18200025	OmniaPure-T UV-TOC/UF	Life science and microbiology, cell culture media
* filter cartridges and sterile filter capsule 0.2 μm included ** The Omnia production unit can either be installed on a bench, on a wall or under the bench

Accessories
19200300	Wall mount Omnia
19200056	Disinfection kit Omnia
19200057	Disinfectant Omnia – 3 Pc./Pkg.

OmniaLab^ED+ is the larger allrounder for the complete laboratory. The perfect 100l tank system for both Type II applications and ultra pure water Type I.

OmniaLab^ED+

The big one.
For H₂O pure types I + II.

OmniaLabED⁺ is the system of choice when both pure water and ultrapure water are needed for the entire laboratory. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer, without having to give any demanding analytical applications a pass. Further to this, each OmniaLabED+-system holds 100 litres of pure water type II ready for withdrawal in a storage tank that is equipped with quality recirculation. OmniaLabED⁺ is exactly right as pure water supplier to autoclaves and laboratory washing machines.

Features

• OptiFill dispenser is standard
• Continuous residual salts removal by electro-deionization
• 100 litre storage tank with recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard

• Technical Data
• Flow chart

Specifications	OmniaLabED+20	OmniaLabED+40	OmniaLabED+70
Type I
Conductivity μS/cm	0.055	0.055	0.055
Resistance M Ω x cm	18.2	18.2	18.2
TOC-value* ppb (with UV-unit)	1 – 5	1 – 5	1 – 5
Dispensing performance dispenser l/min.	up to 2	up to 2	up to 2
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Typ II
Pure water performance l/h at 15 °C	20	40	70
Conductivity µS/cm	0.067 – 1	0.067 – 1	0.067 – 1
Resistance* MΩ x cm	15 – 1	15 – 1	15 – 1
Silicate removal** %	99.9	99.9	99.9
Pure water tank pressurized outlet	optional	optional	optional
Feedwater requirements
Drinking water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.25	0.25	0.25
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to + 35	+2 up to + 35	+ 2 up to + 35
Dimensions Tower*** W x H x D mm	511 x 1520 x 575	511 x 1520 x 575	511 x 1520 x 575
Dimensions Base cabinet tank mm	511 x 800 x 575	511 x 800 x 575	511 x 800 x 575
Weight kg	43	43	45
* in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type*	Typical applications
18700020	OmniaLabED+20	Feedwater for autoclaves and laboratory washers
18700040	OmniaLabED+40	Feedwater for autoclaves and laboratory washers
18700070	OmniaLabED+70	Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
16125000	Water softener MixMulti 32
19200021	Pre-treatment unit OmniaLab - 10“
19200050	UV Flow through disinfection – 254 nm
19200052	UV Unit for TOC reduction – 254 nm
16561201	External pressure booster pump SC 3000